After Self-Cleaning - GE JGSP32 Use And Care Manual

Quick Reminder:
1. Press the AUTO SELF CLEAN pad.
2. Press the INCREASE or DECREASE pti
until the desired Clean Time appears.
cycle, the word 'OFF* will appeur in the display.
set the cycle.
1. Follow the directions in the Before a Clean
2. After closing the dnnr, press the AUTO
AUTO SELF
SELF CLEAN pad.
CLEAN
A
3. Press the INCREASE or DECREASE
displayed.
Clean Time is normally 3 hours. You cart
2 and 4 hours. depending on the amount of
1. Press the CLEAWOFF pad.
CLEAR

After Self-Cleaning

it up with a damp cloth after the oven cools.
If white spots remain, remove them with a soap-filled
steel wf)ol pad. Be sure to rinse thoroughly with
usually a salt residue that cannot be removed by the
clean cycle.
The self-clean cycle will automatically begin after
"CLEAN" is displayed and the time for the clean
cycle is set. The words "ON" and "LOCK" will
appear in the display when the door automatically
locks. It will not be possible to open the oven door
until the temperature drops below the lock
temperature and the LOCK light goes off.
4. When the LOCK light is off, open the door.
NOTE:
n
You can find out when the clean cycle
will be finished by pressing the STOP
TIME pad.
A
The word "clean" will be displayed, the word
"DOOR"' will fl~sh and oven control will signal if you
set the clean cycle and forget to close the oven d(x~r.
A fan may automatically turn on and off to cool
internal purts. This is rx)rmal, and the fan may
continue to run after the oven is turned off.
2. When the LOCK light gws ot~, indicating that the
oven has cmlti below the h~king tempemture,
open the door.
If the oven is not clean after one clean cycle,
repeat the cycle.
supports with cooking oil.
NOTE: No functions cart be p%grammed before the
door automatically unlocks.