Changing The Camera Settings - Sanyo VA-82LAN Instruction Manual

Changing the Camera Settings

Clicking on the control panel displays the on-screen camera configuration menu. You can change
the monitoring and operation preferences stored in the camera through the network connection.
(You cannot change the TOUR operation preferences on this menu.)
MEMO:
The menus displayed depend on the camera model. For details, refer to the instruction manual supplied
with the camera.
The camera control buttons
Use the camera control buttons on the control panel to change the preferences.
• To select a menu
Click / to move the cursor up/down. Move
the cursor to locate the menu item you want to
change.
• To change the setting value
Click / repeatedly to switch the value until
the desired value is displayed.
• To open the submenu
y
Menu items with mark have a submenu for
detailed settings.
Move the cursor to your desired menu and click
to open the submenu.
• To return to the previous screen
Click / to move the cursor to [MENU] at the
bottom of the submenu, set the value to "BACK",
and click .
English
CAMERA CAMERA CAMERA
LENS LENS LENS
PAN/TILT PAN/TILT PAN/TILT
AUTO MODE AUTO MODE AUTO MODE
PASSWORD PASSWORD PASSWORD
LANGUAGE LANGUAGE LANGUAGE
OPTION OPTION OPTION
ADVANCED MENU ADVANCED MENU ADVANCED MENU
PRESET PRESET PRESET
MENU MENU MENU
• To exit from the menu
Click / to move the cursor to [MENU] at the
bottom of the menu, make sure that the value is set
to "END" (or change to "END" if "BACK" is
displayed), and click
• To reset the values to the factory settings
Click / to move the cursor to [PRESET], set
the value to "ON", and click
41
("admin" only)
SET SET SET y y
y y
SET SET SET
SET SET SET y y
SET SET SET y y
SET SET SET y y
SET SET SET
y y
SET SET SET y y
SET SET SET
y y
OFF OFF OFF
END END END
.
.