Table of Contents
Advertisement
3 RESOLUTION
Specifies the video resolution at five levels.
(At three levels when the image compression format
is "H.264".)
4 PICTURE QUALITY
Specifies the video quality in five levels.
Note:
If [PRE/POST] is set at other than "0%/100%" on the
[IMAGE TRANSFER SETTINGS] screen, the values
of [RESOLUTION] and [PICTURE QUALITY] cannot
be changed.
5 Calling the preset positions
For the orientation of the camera
lens and the zoom and focusing
status, these buttons call the
-
preset position registered in
6
"
Registering the preset
position" below.
When you call the preset number higher than 8,
select the number from the pull-down menu and
click the [GO] button.
6 Registering the preset position
You can register the current camera orientation
along with the zoom and focus settings as the preset
position.
To register the preset position, select the number to
be used for current setting from the pull-down menu
and click the [MEMORY] button.
7 BRIGHTNESS
Specifies the video brightness at five levels.
8 DAY/NIGHT (only for the cameras with this
function)
Allows you to change the DAY/NIGHT switching
conditions configured using the camera menu.
Switches the video display
automatically between color and
AUTO
black-and-white depending on
daytime or nighttime brightness.
Always displays the color video
COLOR
image.
Always displays the
B/W
black-and-white video image.
How To Use the Control Panel
9 AUX
These buttons are reserved for additional functions.
The function corresponding to the number selected
in the pull-down menu will be performed. The
function allocated to respective numbers depends
on the camera models.
F [MAIN SETTINGS] button (See page 15)
Displays the menu buttons for an administrative user
("admin").
G Screen display type selection button
Switches the screen display type between "ActiveX"
and "HTML".
MEMO:
To select the "ActiveX", make sure that the "H.264
plug-in" has been installed from the supplied
CD-ROM onto the PC.
H Image compression format selection
button
Switches the image compression format between
"H.264" and "JPEG".
I Streaming type selection button
Switches the streaming type between "UNI" and
"MULTI".
MEMO:
When the image compression format is "H.264", and
[MULTICAST SET] on the [CODEC/STREAMING
SETTINGS] screen is set to "ON", the streaming
type selection button is displayed.
12
English
Advertisement
Table of Contents
