Table of Contents
Advertisement
IMAGE TRANSFER SETTINGS
2 Select the [BUFFER SIZE] option for
specifying the buffering capacity for
recording each alarm image. According to
the value you select, perform the following
settings:
When the [BUFFER SIZE] setting is set from
"0.5MB to 8MB"
One alarm image set containing both the pre-
and post-alarm images is stored in the
camera, and then the alarm image set is
transferred one by one to the "VA-SW3050"
software.
Configures the recording capacity ratio
PRE/
between the pre- and post-alarm image
POST
recordings.
Configures the recording rate for the
RATE
alarm image.
Note:
If [PRE/POST] is set at other than "0%/
100%", the [LIVE/NORMAL RECORD (2)]
setting cannot be changed.
When the [BUFFER SIZE] setting is set to "OFF"
When the alarm is detected, only the
post-alarm images will be transferred to the
"VA-SW3050" software. The transfer speed
depends on the network environment.
Specifies the duration of each alarm
image to transfer (During this
DURATION
duration, no other alarms can be
processed for transferring the alarm
image).
4 [SET] button
After completing the settings, click this button
to confirm the settings.
5 [CANCEL] button
To restore the original settings, click the
[CANCEL] button before clicking the [SET]
button.
6 [HELP]
Displays the [HELP] screen in a separate
window.
English
29
("admin" only)
Advertisement
Table of Contents
