Table of Contents
Advertisement
3 Specifying the function to be performed
The specified schedule can be applied to the
following five functions.
• TIMER (SMTP)
Enable/disables the e-mail transmission
using the timer.
• TIMER (FTP)
Enables/disables the image transmission
using the timer in the FTP mode.
• ALARM (SMTP)
Enables/disables transmission of the
alarm notification e-mail.
• ALARM (FTP)
Enables/disables alarm image
transmission in the FTP mode.
• REMOTE ALARM "ACTIVE"
Enables/disables Alarm Output 2 remotely.
For each function above, select "ON" or
"OFF".
OFF
Disables the function.
Performs the function according to the
ON
schedule.
4 [COPY] button
Copies the setting of the selected row.
Clicking the [COPY] button stores the setting
in the memory buffer and turns the button
color to red.
5 [PASTE] button
Replaces the row where the [PASTE] button
is clicked with the setting copied using the
[COPY] button.
6 Schedule map
The schedule configured in [START/END]
(2) is displayed as a map.
Click the [SET] button at the bottom of the
screen to update the contents.
SCHEDULE SETTINGS
7 [FTP SETTING] button
Displays the [IMAGE TRANFER SETTINGS]
screen.
MEMO:
The alarm image transmission and timer
transmission in the FTP mode can be
performed according to the schedule
specified on this screen (see pages 31 - 32).
8 [HELP]
Displays the [HELP] screen in a separate
window.
MEMO:
• If the schedules overlap, the operation that
requires longer time takes precedence.
In the case shown in the figure below, the
function works continuously from the earlier
start time (START1) to the later end time
(END2).
START1
START2
The duration for the function to
• If the scheduled duration is changed after the
function is activated, the function will follow
the updated schedule.
36
("admin" only)
END1
END2
be activated
English
Advertisement
Table of Contents
