Ap Mode - TP-Link TL-WR702N User Manual

TL-WR702N 150Mbps Wireless N Nano Router
Figure 3-5 Quick Setup - Working Mode
Note:
The Router supports five working modes for multi-user to access the Internet: AP, Router,
Repeater, Bridge and Client. In AP mode, TL-WR702N enables the wired LAN to connect to the
Internet wirelessly. In Router mode, it can access the Internet via DSL/Cable Modem. In Repeater
mode, the device will relay data to an associated root AP. In Bridge mode, the device bridges to
another AP. In Client mode, the device will act as a wireless station to enable wired host(s) to
access AP. You can configure your device quickly by the following steps in different modes.
3.2.1

AP Mode

When you choose AP on Working Mode page in Figure 3-5 , take the following steps:
1. Click Next in Figure 3-5, and then Wireless AP page will appear as shown in Figure 3-6.
- 13 -