Wireless; Wireless Settings - TP-Link TL-WR702N User Manual

server in this device will not start up.
3. If the new LAN IP address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically, but the Virtual Server and
DMZ Host will not take effect until they are re-configured.

7.6 Wireless

Figure 7-7 Wireless menu
There are two submenus under the Wireless menu (shown in Figure 7-7): Wireless Settings and
Wireless Security. Click any of them, and you will be able to configure the corresponding
function.
7.6.1

Wireless Settings

Choose menu "Wireless → Wireless Settings", and then you can configure the basic settings
for the wireless network on this page.
TL-WR702N
Figure 7-8 Wireless Settings - Bridge
- 131 -
150Mbps Wireless N Nano Router