TL-WR702N
150Mbps Wireless N Nano Router
8.7.1
DHCP Settings
Choose menu "DHCP → DHCP Settings", and you can see the page as shown in Figure 8-10, if
you have chose Smart IP(DHCP) in Network → LAN, in which situation the device will help you
configure the DHCP automatically as you need. If you have chose Static IP in Network → LAN,
you can see the page as shown in Figure 8-11, and then you can configure the DHCP Server on
this page. The Router is set up by default as a DHCP (Dynamic Host Configuration Protocol)
server, which provides the TCP/IP configuration for all the PC(s) that are connected to the Router
in the LAN.
Figure 8-10 DHCP Settings
Figure 8-11 DHCP Settings
- 153 -