Wireless Settings - TP-Link TL-WR702N User Manual

8.6.1

Wireless Settings

Choose menu "Wireless → Wireless Settings", and then you can configure the basic settings
for the wireless network on this page.
SSID - Enter a string of up to 32 characters. The same name of SSID (Service Set
Identification) must be assigned to all wireless devices in your network. The default SSID is
set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each
Router's MAC address). But it is recommended strongly that you change your networks
name (SSID) to a different value. This value is case-sensitive. For example, TEST is NOT
the same as test.
MAC of AP - The MAC address of AP that you want to access.
Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
Survey - Click this button, you can survey the AP which runs in the current channel.
TL-WR702N
Figure 8-8 Wireless Settings - Client
- 151 -
150Mbps Wireless N Nano Router