Time - TP-Link TL-WR702N User Manual

There are nine submenus under the System Tools menu: Time, Diagnostic, Firmware, Factory
Defaults, Backup and Restore, Reboot, Password, System Log and Statistics. Click any of
them, and you will be able to configure the corresponding function. The detailed explanations for
each submenu are provided below.

5.14.1 Time

You can set time manually or get GMT from the Internet for the router on this page:
Time Zone - Select your local time zone from this pull-down list.
Date - Enter your local date in MM/DD/YY into the right blanks.
Time - Enter your local time in HH/MM/SS into the right blanks.
To set time manually, follow the steps below:
1. Select your local time zone.
2. Enter the Date in Month/Day/Year format.
3. Enter the Time in Hour/Minute/Second format.
4. Click Save.
For automatic time synchronization:
1. Enter the address of the NTP Server I or NTP Server II.
Click the Get GMT button to get GMT time from Internet if you have connected to Internet.
2.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your
time zone once you login to the router successfully, if not, the time limited on these functions will
not take effect.
TL-WR702N
Figure 5-57 Time settings
- 103 -
150Mbps Wireless N Nano Router