CABLE DIAGRAM
The cable diagram below shows the proper routing of the Long Cable (23) and the Short Cable (58). Use the
diagram to make sure that the two Cables and the cable traps have been assembled correctly. If the Cables
have not been correctly routed, the weight system will not function properly and damage may occur. The num-
bers show the correct route for each Cable; the starting and ending points of each Cable are labeled. Make
sure that the cable traps do not touch or bind the Cables.
5
Long Cable (23)
7
4
2
3
1—High Pulley
6
5—Long "U"-Bracket
Weight Stack—8
Short Cable (58)
4
3
2
1—Low Pulley
18