Windows - Kingston Technology DataTraveler 6000 User Manual

Recommendations
To ensure there is ample power provided to the DT6000 device, insert it directly into a USB
port on your notebook or desktop. Avoid connecting the DT6000 to any peripheral device(s)
that may feature a USB port, such as a keyboard or USB-powered hub.
*Note: See ‘Drive Letter Conflict' on page 20.
Setup (Windows environment)
1. Insert the DT6000 into an available USB port on
your notebook or desktop and wait for Windows
to detect it.
• Windows XP users will receive a ‘Found
New Hardware' notification as seen in
.
2.1
• Windows Vista/7 users will receive a device
driver notification as seen in
Once the new hardware detection is complete,
Windows will prompt you to begin the initialisation
process.
• Windows XP users will see an AutoPlay
window similar to the one in
• Windows Vista/7 users will see a different
AutoPlay window.
2. Select the
DT6000_Launcher.exe
If Windows does not AutoPlay, you can browse to
the removable disk drive (
execute the DT6000_Launcher program. This will
also start the initialisation process.
Document No. 48000191-001.A00
Figure 2.2
Figure 2.3
option ‘
'.
) and manually
Figure 2.4
DataTraveler
Figure
Figure 2.1 – Found New Hardware
.
Figure 2.2 – Device Driver Installation
.
Run
®
6000
(Windows XP)
(Windows Vista/7)
Page 3 of 21