How To Configure The Dt2000 With Windows Os - Kingston Technology DataTraveler 2000 User Manual

13. How to configure the DT2000 with Windows OS

In the event that hacking detection has been triggered by entering the incorrect PIN 10 times
in succession, or the drive has been reset,
Once a new User PIN has been created, the DT2000 will need to be initialized and formatted.
To initialize your DT2000, do the following:
1. Create a new User PIN (see section 4).
2. Unlock the DT2000 by entering the new User PIN and connect to a computer's USB
port.
3. The computer should notify the user with the following message:
4. Proceed by clicking on Format disk.
Select FAT32 or NTFS depending on your needs, enter a Volume Label and click Start.
Document No. 480ADT2000.A00
all data on the drive will be lost
DT2000
forever.
Page 12 of 17