Printout Problems Not Related To Print Quality; Blank Pages Print; Printout Has Smears On The Bottom Edge; Printing Is Too Slow - Epson Stylus Photo 925 User Manual

Printout Problems Not Related to Print Quality

If one of the following problems has occurred, try the solutions
listed for the problem.

Blank pages print

Printout has smears on the bottom edge

Printing is too slow

Blank pages print
Run the Head Cleaning utility to clear any clogged nozzles.
"Cleaning the Print Head" on page 79.
Printout has smears on the bottom edge
If the paper is curled toward the printable side, flatten it or
curl it slightly in the opposite direction.
Set the adjust lever to the
Printing is too slow
Make sure that the Media Type setting in the LCD panel is
correct.

Paper Does Not Feed Correctly

If one of the following problems has occurred, try the solution(s)
listed for that problem.
92
^ position.