Additional Battery Installation Setup - AEG PROTECT B. 750 Operating Instructions Manual

PROTECT B. 3000 / B. 3000 BP
For mounting the 3000 VA UPS in a 19" rack fix the mounting
ears to the UPS and install the unit to the rails. Do the same
for the optional battery module.
5.2

Additional battery installation setup

PROTECT B. 1500, 2000 und 3000 include external battery
ports that allow connecting additional battery modules. This
provides additional battery runtime.
PROTECT B. 1500 und B. 2000
There is one external battery port on the UPS and on the
battery pack.
1.
2.
If continuing to add up extended battery packs, repeat
above step.
Caution:
Connect the battery connectors quickly and
check for a tight fit of the connections.
Connect the battery cable to the external battery
port of the rear of UPS.
Then connect the supplied battery cable from
extended battery module to the external battery
port on the rear of the UPS.
32