Searching For And Selecting A Location; Searching For A Location By Address - Pioneer AVIC-F310BT Operation Manual

Searching for and selecting a location

CAUTION
For safety reasons, these route-setting functions
are not available while your vehicle is in motion.
To enable these functions, you must stop in a
safe place and put on the handbrake before set-
ting your route.
p Some information regarding traffic regula-
tions depends on the time when the route
calculation is performed. Thus, the infor-
mation may not correspond with a certain
traffic regulation when your vehicle actually
passes through the location in question.
Also, the information on the traffic regula-
tions provided will be for a passenger vehi-
cle, and not for a truck or other delivery
vehicles. Always follow the actual traffic
regulations when driving.
Searching for a location by
address
The most frequently used function is [Ad-
dress], in which the address is specified and
the location is searched.
p Depending on the search results, some
steps may be skipped.
Display the "Navigation Menu" screen.
1
2 Touch [Address].
The "Address Search" screen appears.
3 Touch [City].
The "Enter City Name" screen appears.
# Touch the key next to "Country" to select the
country.
If the location that you want to search for is in an-
other country, this changes the country setting.
p Once the country has been selected, you
only have to change countries when the lo-
cation is outside of the country you se-
lected.
4 Enter the city name and then touch
[OK].
The "Select City" screen appears.
p You can search for the city name by key-
word.
= For details, refer to Searching for a name
by entering multiple keywords on the
next page.
# Touch
.
The representative location of the city appears on
the map screen.
5 Touch the desired city name.
The "Enter Street Name" screen appears.
6 Enter the street name and then touch
[OK].
The "Select Street" screen appears.
p You can search for the street name by key-
word.
Chapter
08
37
Engb