Flow From Startup To Termination; On First-Time Startup; Regular Startup - Pioneer AVIC-F310BT Operation Manual

Chapter
02 Before you start
! Keep the detachable device out of direct sun-
light and high temperatures.
! After removing the detachable device, keep it
in a safe place so it is not scratched or
damaged.
Flow from startup to
termination
1 Start the engine to boot up the system.
p To protect the LCD screen from damage, be
sure to use your fingers to touch the touch
panel keys. (The stylus is supplied for spe-
cial calibrations. Do not use the stylus for
normal operations.)
2 Turn off the vehicle engine to termi-
nate the system.
The navigation system is also turned off.

On first-time startup

When you use the navigation system for the
first time, select the language that you want to
use.
1 Start the engine to boot up the system.
After a short pause, the navigation splash
screen appears.
And then the "Select UI Language" screen ap-
pears.
2 Touch the language that you want to
use on the screen.
The "Voice Language Selection" screen ap-
pears.
14
Engb
3 Touch the language that you want to
use for the voice guidance.
The navigation system will now restart.
4 Read the disclaimer carefully, checking
its details, and then touch [OK] if you
agree to the conditions.
The map screen appears.

Regular startup

% Start the engine to boot up the system.
p The screen shown will differ depending on
the previous conditions.
p When there is no route, the disclaimer ap-
pears after the navigation system reboots.
Read the disclaimer carefully, checking its
details, and then touch [OK] if you agree to
the conditions.