Switching The Map Between 2D And 3D; Displaying Manoeuvres; Setting The Map Colour Change Between Day And Night - Pioneer AVIC-F310BT Operation Manual

How to use the map
Returns previous screen.
6 Touch the subcategory.
A red tick mark appears next to the selected
category. To cancel the selection, touch the
entry again.
# If you want to search with more detailed cate-
gories, touch .
Touch the item and touch [OK]. When only a few
types of the detailed categories are selected, blue
tick marks will appear.
p When subcategory is selected,
available.
7 Touch [OK].
Returns previous screen.
8 To finish the selection, touch [OK].
Switching the map between 2D
and 3D
Various types of screen displays can be se-
lected for navigation guidance.
2D map screen
3D map screen
Display the "Map" screen.
1
2 Touch [View Mode].
Each time you touch the key changes that set-
ting.
! [2D] (default):
Displays the 2D map screen.
! [3D Detection]:
Displays the 3D map screen.
is not

Displaying manoeuvres

Selects whether to display or hide the next
turn ahead of the vehicle on the map.
Display the "Map" screen.
1
2 Touch [Show Manoeuvre].
Each time you touch the key changes that set-
ting.
! [View] (default):
Displays the next turn ahead of the vehicle
on the map.
! [Hide]:
Hides the next turn ahead of the vehicle on
the map.
Setting the map colour change
between day and night
To improve the visibility of the map during the
evening, you can set the timing for changing
the combination of the map colour.
Display the "Map" screen.
1
Chapter
05
27
Engb