Setting The Illumination Colour; Setting The Fm Tuning Step; Using Auto Pi Seek For Preset Stations - Pioneer AVIC-F310BT Operation Manual

Customising the initial settings
Using the initial settings, you can customise
various system settings to achieve optimal per-
formance from this navigation system.
Displaying the
"Initial Setting" screen
To customise the initial settings, display the
"Initial Setting" screen.
1 Press SRC/OFF and hold until the audio
source turns off.
= For details, refer to Switching the audio op-
eration screen on page 75.
2 Press the centre of MULTI-CONTROL
and hold until the initial setting screen ap-
pears in the display.
1 Screen title
2 Setting item
3 Setting value
Setting the illumination
colour
The illumination colour can be selected from
10 different colours. Furthermore, the illumina-
tion colour can switched between these 10 col-
ours in order.
Display the "Initial Setting" screen.
1
= For details, refer to Displaying the
"Initial Setting" screen on this page.
Turn MULTI-CONTROL to select "RGB Il-
2
lumination".
3 Press MULTI-CONTROL left or right to
select the desired colour.
White (white) — Light Green (light green) —
Green (green) — Light Blue (light blue) —
Blue (blue) — Yellow (yellow) — Amber
(amber) — Red (red) — Scan (scan) — Cus-
tom (custom)
! "Scan":
Shifts between the eight default colours in
sequence gradually.
! "Custom":
Sets your created colour which is installed
from SD as the illumination colour.

Setting the FM tuning step

Normally the FM tuning step employed by
seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to
100 kHz. It may be preferable to set the tuning
step to 50 kHz when AF is on.
Display the "Initial Setting" screen.
1
= For details, refer to Displaying the
"Initial Setting" screen on this page.
Turn MULTI-CONTROL to select "FM
2
Step".
3 Press the centre of MULTI-CONTROL to
switch between "50kHz" and "100kHz".
p The tuning step remains at 50 kHz during
manual tuning.
Using Auto PI Seek for
preset stations
The navigation system can automatically
search for a different station with the same
programming, even during preset recall.
Chapter
23
103
Engb