Pioneer AVIC-F310BT Operation Manual page 114

Appendix
Appendix
The map colour does not switch
automatically between daytime
and nighttime.
The screen is too bright.
The display is very dim.
No sounds of audio source are
produced.
The volume level will not rise.
The volume of navigation gui-
dance and beeps cannot be ad-
justed.
The person on the other end of
the phone call cannot hear the
conversation due to an echo.
There's no picture.
There is no response when the
touch panel key are touched, or
a different key responds.
Problems in the audio screen
Symptom
CD playback is not possible.
The audio skips.
No sounds are produced.
The volume level will not rise.
114
Engb
[Day/Night Display] is set to [Day]. Check [Day/Night Display] setting and make
An improper value has been set on
"Brightness".
An improper value has been set on
"Brightness".
The volume level is low.
A speaker lead is disconnected.
Try to adjust them with MULTI-CON-
TROL.
The voice from the person on the
other end of the phone call is output
from the speakers and then picked
up by the microphone again, creat-
ing an echo.
The backlight of the LCD panel is
turned off.
The touch panel keys deviate from
the actual positions that respond to
your touch for some reason.
Cause
The disc is inserted upside down.
The disc is dirty.
The disc is cracked or otherwise da-
maged.
The files on the disc are an irregular
file format.
The disc format cannot be played
back.
The loaded disc is a type this system
cannot play.
The navigation system is not firmly
secured.
Cables are not connected correctly.
The system is paused or performing,
fast reverse or forward during the
audio playback.
sure [Automatic] is selected. (Page 27)
Check the settings.
Check the settings.
Adjust the volume level.
Check the connection.
Turn the volume up or down using [Sound]
on the "Settings Menu" screen. (Page 65)
Use the following methods to reduce the
echo:
—Lower the volume on the receiver
—Have both parties pause slightly before
speaking
Turn on the backlight. (Page 70)
Perform touch panel calibration. (Page 68)
Action (Reference)
Insert the disc with the label upward.
Clean the disc.
Insert a normal, round disc.
Check the file format.
Replace the disc.
Check what type of disc it is. (For more cau-
tions about handling each type of media,
refer to Page 124.)
Secure the navigation system firmly.
Connect the cables correctly.
There is no sound on fast reverse or forward.