Convenient Printing Functions; Creating Abooklet (Booklet/Booklet Mode); Creating A Booklet (Booklet/Booklet Mode) - Oce im4512 Operation Manual

CONVENIENT PRINTING
FUNCTIONS
This chapter explains convenient functions for specific printing objectives.
The explanations assume that the paper size and other basic settings have already been selected. For the basic
procedure for printing and the steps for opening the printer driver properties window, see the following section:
☞
Windows: BASIC PRINTING PROCEDURE (page
☞
Macintosh: BASIC PRINTING PROCEDURE (page
NOTE
In Windows, view printer driver Help for details on printer driver settings for each printing function.

CREATING A BOOKLET (Booklet/Booklet Mode)

The booklet function prints on the front and back of each
sheet of paper so that the sheets can be folded and
bound to create a booklet. This is convenient when you
wish to compile printed output into a booklet.
When a saddle stitch finisher is installed and saddle
stitch printing and the staple function are selected, the
output is automatically folded and stapled at the center.
This allows you to conveniently use the output as a
handout or booklet without the need for any further work.
NOTE
To use the saddle stitch print function, the duplex module is
required.
Windows
(1) (2)
1-2)
2-2)
(1) Configure the settings on the [Main] tab.
(3)
(2) Select [Booklet Mode]
The booklet printing method can be selected from the
pull-down menu.
(3) Select the "Binding Edge".
[2 Staples] can be selected for "Staple" when a saddle
stitch finisher is installed.
4-2