Staple Finisher-C1/Booklet Finisher-C1/External 2/3 Hole
Puncher-B1 (Optional)
This section describes the procedure for replacing the staple cartridge in the Staple Finisher-C1 or Booklet Finisher-C1, and how to
remove the punch waste from the External 2/3 Hole Puncher-B1.
Replacing the Staple Cartridge in the Stapler Unit
When the Staple Finisher-C1 or Booklet Finisher-C1 is almost out of staples, and the staple cartridge in the stapler unit must
be replaced, a screen prompting you to replace the staple cartridge appears on the touch panel display. Follow the procedure
described below to replace the staple cartridge.
Use only staple cartridges intended for use with this machine.
We recommend that you order staple cartridges from your local authorized Canon dealer before your stock runs out.
1
Open the front cover of the finisher .
2
Pull out the staple case, holding it by the green tab .
Booklet Finisher-C1
Staple Finisher-C1/Booklet Finisher-C1/External 2/3 Hole Puncher-B1 (Optional)
Staple Finisher-C1
1
1-29