3
Press the area indicated by PUSH on both side of the staple cartridge, and then pull out the staple
case .
1
4
Insert the new staple cartridge .
Press the spring-loaded case down until it clicks into place.
•
Use only staple cartridges intended for use with this machine.
•
Do not remove the seal that holds the staples together before you place the staple cartridge into the staple case.
Only one staple cartridge can be inserted at a time.
5
Remove the seal holding the staples together, by pulling it straight out .
If you pull it out at an angle, it may tear. Make sure that you pull the seal straight out.
1-30
Staple Finisher-C1/Booklet Finisher-C1/External 2/3 Hole Puncher-B1 (Optional)