Canon C5051 User Manual page 75

1
Inspect all paper jam locations indicated on the touch panel display, and remove any jammed paper .
See the appropriate pages below for instructions on finding and removing jammed paper. Or, you can follow the instructions on the touch
panel display.
•
Paper Output Unit (See "Paper Output Unit (Inside the Main Unit), " on p. 2-6.)
•
Fixing Unit (See "Fixing Unit (Inside the Main Unit), " on p. 2-9.)
•
Entrance of Duplexing Unit (See "Entrance of Duplexing Unit (Inside the Main Unit), " on p. 2-11.)
•
Duplexing Unit (See "Duplexing Unit (Inside the Main Unit), " on p. 2-13.)
•
Multi-Purpose Tray (See "Multi-Purpose Tray, " on p. 2-15.)
•
Paper Drawer 1 (See "Paper Drawer 1, " on p. 2-17.)
•
Paper Drawer 2 (See "Paper Drawer 2, " on p. 2-19.)
If jammed paper tears while it is being removed, be sure to remove any remaining pieces from inside the machine.
If the machine's power is turned OFF when there is a paper jam, detection of paper jams in the paper drawers is not possible after the
power is turned back ON. Clear paper jams without turning the power OFF.
Some areas that are shown to have paper jams may not actually have paper jams. However, always check all locations indicated on the
touch panel display in the order that is given.
2
If a paper jam occurs inside an optional unit, see the instructions on the following pages .
•
Cassette Feeding Unit-AD1 (Optional) (See "Cassette Feeding Unit-AD1 (Optional), " on p. 2-22.)
•
Paper Deck Unit-B1 (Optional) (See "Paper Deck Unit-B1 (Optional), " on p. 2-25.)
•
Feeder (Optional) (See "Feeder(Optional), " on p. 2-27.)
•
Inner Finisher-A1 (Optional) (See "Inner Finisher-A1 (Optional), " on p. 2-31.)
•
Inner 2Way Tray-F1 (Optional) (See "Inner 2Way Tray-F1 (Optional), " on p. 2-46.)
•
Copy Tray-J1 (Optional) (See "Copy Tray-J1 (Optional), " on p. 2-48.)
•
Inside the Top Cover of the Staple Finisher-C1/Booklet Finisher-C1 (Optional) (See "Inside the Top Cover of the Staple Finisher-C1/Booklet
Finisher-C1 (Optional), " on p. 2-35.)
•
Inside the Buffer Pass Unit-G1 of the Staple Finisher-C1/Booklet Finisher-C1 (Optional) (See "Inside the Buffer Pass Unit-G1 of the Staple
Finisher-C1/Booklet Finisher-C1 (Optional), " on p. 2-37.)
•
Inside the Front Cover of the Booklet Finisher-C1 (Optional) (See "Inside the Front Cover of the Booklet Finisher-C1 (Optional), " on p. 2-38.)
•
Saddle Stitcher Unit (Optional) (See "Saddle Stitcher Unit (Optional), " on p. 2-40.)
•
Puncher (Optional) (See "External 2/3 Hole Puncher-B1 (Optional), " on p. 2-43.)
2-5
Clearing Paper Jams
2