Inputs/Outputs Status - GE GEK-106465A Instruction Manual

Signals associated to I/O boards are divided in several groups:
Input activation signals (Contact Inputs):
Contact input activation signals can be obtained at Actual > Status > Contact Inputs > Board X, being X the
corresponding I/O board. Depending on the I/O board, inputs are represented as follows:
(X: board F, G, H, J)
CONT IP_X_CC1
CONT IP_ X _CC2
CONT IP_ X _CC3
CONT IP_ X _CC4
CONT IP_ X _CC5
CONT IP_ X _CC6
CONT IP_ X _CC7
CONT IP_ X _CC8
CONT IP_ X _CC9
CONT IP_ X _CC10
CONT IP_ X _CC11
CONT IP_ X _CC12
CONT IP_ X _CC13
CONT IP_ X _CC14
CONT IP_ X _CC15
CONT IP_ X _CC16
The operation logic for supervision signals (board type 2) is detailed in section 3.3.2. in this manual.
36
I/O MODULES DESCRIPTION
TABLE 5-2: INPUT STATUS
INPUT STATUS
CIO Remote CAN Digital I/O Module
MIXED BOARD
(TYPE 1)
CC1
CC2
CC3
CC4
CC5
CC6
CC7
CC8
CC9
CC10
CC11
CC12
CC13
CC14
CC15
CC16
5.2.2.

INPUTS/OUTPUTS STATUS

SUPERVISION BOARD
(TYPE 2)
CC1
CC2
CC3
CC4
CC5
CC6
CC7
CC8
Va_COIL1
Vb_COIL1
Va_COIL2
Vb_COIL2
O7_SEAL
O8_SEAL
SUP_COIL1
SUP_COIL2
GEK-106465A