Table of Contents
Advertisement
g
2.2
Installation Procedure
1.
Switch off your computer, and unplug it from the
socket-outlet.
2.
Disconnect the power cord from the computer (rating
250Vac/10A) and connect this cord to the male input
socket (2) at the rear of the UPS (figures on the right
show simplified ML 350-700 model).
3.
Using the output cord provided, connect the computer
to the appliance outlets (3) of the unit.
4.
Connect the mains cord of the UPS to a working,
grounded AC wall socket outlet. The green LED
'LINE' will blink now: mains power is available and the
batteries are charging.
5.
For best results, allow the UPS to recharge the
batteries for a period of approx. 10 hours. It is
acceptable to use the UPS without first charging the
battery, but the runtime may be reduced.
6.
For advanced communication possibilities, the RS232
interface port (4) can be connected to a computer
system. See chapter 4.
OPM_MLE_LTE_350_1K0_1GB_V011
ML 350-700
3
™
GE Digital Energy
ML 1000
DE ML Series: user manual 1.1 (GB)
ML Series
Hide quick links:
Advertisement
Table of Contents
