GE r08654v-1 Installation Instructions Manual page 6

Installation Instructions
Cutout for 27"
A
Ovens only Under Counter
For JKS10, JKP30, JKP70, PK916, ZEK938 models only.
Gas or electric cooktops may
be installed over this oven.
See cooktop installation
instructions for cutout size.
See label on top of oven for
approved cooktop models.
25" (63.5 cm)
Top and/or side fillers
may be necessary
if unit is positioned
between existing
cabinets. Be sure
they are attached
securely, since they
will anchor the oven
in the cabinet.
3/4" (1.9 cm)
Support Platform
Required
MUST SUPPORT 150 LBS. (68 Kg)
(68.6 cm)
25" (63.5 cm) Min.
25 1/4" (64.1cm) Max.
27 5/8" (70.2 cm) Min.
28 1/8" (71.4 cm) Max.
6
Single Built-In
240V / 208V
Junction Box
5"
Location (12.7 cm)
Max. from the
left or right
side
Allow
1"
(2.5 cm)
unit overlap top
and bottom of
oven, 1" (2.5 cm)
unit overlap side
edges
Must
match
toekick
height
NOTE: This oven is only approved to
be installed under the specific models
as labeled on this unit.
Gas and electrical connections
for gas cooktop must be located
in an adjacent accessible
location to the right.
22" (55.9 cm) Min.
Above Support
36" (91.4 cm)
Platform
Typical
Countertop
Height
24" (61cm)
4" (10.2 cm)
Typical
Toekick