GE r08654v-1 Installation Instructions Manual page 10

Installation Instructions
Cutout for 30"
A
For JTP35, JTP55, JTP75, PT956, PT960, ZET958 models only.
28 1/2" (72.4 cm)
28 5/8" (72.7 cm)
Allow 11/16"
ALLOW 11/16"
(1.75 cm) for
FOR OVERLAP
overlap of oven
OF THE OVEN
over side edges
OVER SIDE EDGES
of cutout
OF CUTOUT
Opening
Between
Inside Walls
Must Be At
BETWEEN INSIDE
Least 28 1/2"
Allow a minimum
ALLOW A MINIMUM OF 21"
(72.4 cm) Wide
of 21" (53.3 cm) for
FOR CLEARANCE TO
ADJACENT CORNERS, clearance to adjacent
DRAWERS, WALLS ETC.
corners, drawers,
WHEN THE DOOR Allow 1" (2.5 cm)
walls, etc. when
IS OPENED.
minimum for
door is open
ALLOW 1" FOR
overlap of oven
top and 1
(3.2 cm) overlap
of oven bottom
of cutout
21" (53.3 cm)
21"
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. For
double ovens, the runners and braces
must support 275 lbs (124 Kg).
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
(76.2 cm)
Cutout
(24.1 cm)
Width
CUTOUT
WIDTH
28 1/2" MIN.
Min.
28 5/8" MAX.
Max.
THE OPENING
WALLS MUST
BE AT LEAST
28 1/2"WIDE
CUTOUT
Cutout
HEIGHT
Height
51 13/16" MIN.
51 15/16" MAX. 51 13/16" 131.6 cm)
Min.
OVERLAP
1
⁄ "
51 15/16" (131.9 cm)
ON OVEN TOP
4
AND BOTTOM
Max.
OF CUTOUT
Recommended
RECOMMENDED
cutout location CUTOUT LOCATION
30"
30"
12" FROM THE FLOOR
from floor 12" (30.5 cm)
(76.2 cm)
CABINET
Cabinet
WIDTH
Width
Double Built-In Ovens only
9 1/2"
Cabinet Width
Junction Box
Max.
Location
Recommended
5"
(junction box
Cutout Location
may be
located in from Floor
JUNCTION BOX
adjacent
LOCATION
cabinet)
Cutout Depth
Cutout Width
Cutout Height
47" (119.4 cm)
47" TO
BOTTOM OF
Min.
JUNCTION BOX
NOTE: If the cabinet does not
to Bottom of
Junction Box
have a front frame and the sides
are less than 3/4" (1.9 cm) thick,
shim both sides equally to
establish the cutout width.
Suitable
Bracing
to Support
Runners
10
30" (76.2 cm)
12" (30.5 cm)
23 1/2" (59.7 cm) Min.
28 1/2" (72.4 cm) Min.
28 5/8" (72.7 cm) Max.
51 13/16" (131.6 cm) Min.
51 15/16" (131.9 cm) Max.
C L
21 5/8"
21 5/8"
OVER CENTERLINE
(54.9 cm) Over
OF CABINET
Centerline
of Cabinet
2" x 4"
2" x 4" or
EQUIVALENT (5 cm x 10 cm)
RUNNERS
or equivalent
runners level
with bottom
of cutout