GE r08654v-1 Installation Instructions Manual page 4

Installation Instructions
Cutout for 27"
A
Ovens only
For JKS10, JKP30, JKP70, PK916, ZEK938 models only.
Cabinet
Width
27" (68.6 cm)
Cutout Width
25" (63.5 cm)
Allow 1" (2.5 cm)
25 1/4" (64.1 cm)
for overlap of
oven over side
edges of cutout
2" x 4"
(5 cm x 10 cm)
or equivalent
runners level
with bottom
of cutout
20" (50.8 cm)
Allow
1" (2.5 cm)
Allow a minimum
minimum for
of 20" (50.8 cm) for
overlap of
clearance to adjacent
oven top and
corners, drawers, walls,
bottom
etc. when door is open
of cutout
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. For
single ovens, the runners and braces
must support 150 lbs (68 Kg).
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
5" (12.7 cm)
Max. from the
left or right
side
Junction Box
Location
Min.
Max.
Cutout
Height
27 5/8"
(70.2 cm) Min.
28 1/8"
(71.4 cm) Max.
Recommended
cutout location
from floor 32 1/2"
(82.6 cm)
Single Built-In
(68.6 cm)
Cabinet Width
Recommended
Cutout Location
from Floor
Cutout Depth
Cutout Width
Cutout Height
22" (55.9 cm)
Min. above
base rail
NOTE: If the cabinet does not
Alternate Junction
Box Location –
have a front frame and the sides
access from
are less than 3/4" (1.9 cm) thick,
adjacent cabinet
may be required
shim both sides equally to
establish the cutout width.
24"
(61 cm)
These ovens are not approved for
stackable installations.
4
27" (68.6 cm)
32 1/2" (82.6 cm)
23 1/2"
(59.7 cm) Min.
25" (63.5 cm) Min.
25 1/4" (64.1 cm) Max.
27 5/8" (70.2 cm) Min.
28 1/8" (71.4 cm) Max.
2" x 4" or
2" x 4" (5 cm x 10 cm) or
Equivalent
equivalent runners level
with bottom of cutout Runners
24"
18"
18" (45.7 cm)
27"
27" (68.6 cm)