NordicTrack C 1500 Pro Treadmill User Manual
  1. Manuals
  2. Brands
  3. NordicTrack Manuals
  4. Treadmill
  5. C 1500 Pro Treadmill
  6. User manual

NordicTrack C 1500 Pro Treadmill User Manual

English manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

www.nordictrack.com
USER'S MANUAL
Model No. NTL12011.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-800-TO-BE-FIT
(1-800-862-3348)
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.nordictrackservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.

Advertisement

Table of Contents
loading

Related Manuals for NordicTrack C 1500 Pro Treadmill

Summary of Contents for NordicTrack C 1500 Pro Treadmill

  • Page 1 USER’S MANUAL Model No. NTL12011.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care.

  • Page 2: Table Of Contents

    Apply the decal in the location shown. Note: The decals may not be shown at actual size. One decal is located at the front of the treadmill. NORDICTRACK is a registered trademark of ICON IP, Inc.

  • Page 3: Important Precautions

    17. To informed of all warnings and precautions. purchase a surge suppressor, see your local NORDICTRACK dealer, call the telephone 3. Use the treadmill only as described. number on the front cover of this manual, or see your local electronics store.
  • Page 4 DANGER: 20. Never leave the treadmill unattended while Always unplug the power it is running. Always remove the key, press cord immediately after use, before clean- the power switch into the off position (see ing the treadmill, and before performing the the drawing on page 5 for the location of the maintenance and adjustment procedures power switch), and unplug the power cord...

  • Page 5: Before You Begin

    Thank you for selecting the revolutionary reading this manual, please see the front cover of this NORDICTRACK C 1500 PRO treadmill. The C 1500 manual. To help us assist you, please note the product ® PRO treadmill offers an impressive selection of fea- model number and serial number before contacting us.

  • Page 6: Part Identification Chart

    PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.

  • Page 7: Assembly

    ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 6. • P lace all parts in a cleared area and remove the • A ssembly requires the following tools: packing materials. Do not dispose of the packing materials until you finish all assembly steps. the included hex key • T he underside of the walking belt is coated with one adjustable wrench high-performance lubricant.
  • Page 8 3. Identify the Left Upright (89), which is marked “Left.” Have a second person hold the Left Upright near the Base (94). See the inset drawing. Tie the wire tie in the Left Upright (89) securely around the end of the Wire Upright Wire (81).
  • Page 9 5. Identify the Left Base Cover (82) and the Right Base Cover (83). Slide the Left Base Cover onto the Left Upright (89). Slide the Right Base Cover onto the Right Upright (90). Do not press the Base Covers into place yet. Slide the Console Base Back (93) onto the Uprights (89, 90).
  • Page 10 7. Start four #10 x 3/4" Screws (9) with four #10 Star Washers (32) into the Pulse Bar (112) and the Handrails (87). Wire Slide the Pulse Bar (112) as far in the direc- tion shown as possible, and then tighten the #10 x 3/4"...
  • Page 11 9. Remove the two #8 x 1 1/4" Screws (107) and slide the Left Handrail Cover (79) back about 1 in. The Screws will be reattached in a later Console step. Note: It is not necessary to move the Left Assembly Handrail Insert (84).
  • Page 12 11. Set the console assembly onto the brackets on the Handrails (87). Be careful not to pinch any Console wires. Assembly Attach the console assembly with the four 1/4" x 1/2" Screws (4) that you removed in step 8 and four 1/4" Star Washers (5). Start all four Screws and then tighten them.
  • Page 13 13. Connect the ground wires (G), the 8-pin wires (F), the 10-pin wires (E), and the four speaker wires (H) from the Console (103). Note: The Upright Wire (81) has 8 pins, the pulse wire (E) has 10 pins, and the speaker wires (H) have 2 pins.
  • Page 14 15. Tighten nine #8 x 3/4" Screws (2) into the Console Base Back (93) in the indicated loca- tions, starting with the center Screw. Start First 16. Slide the Handrail Covers (79, 80) forward until they match up with the Console Base (64). Console Attach the Handrail Covers with the four #8 x 1 Assembly...
  • Page 15 17. Raise the Frame (56) to the position shown. Orient the Storage Latch (53) so that the large barrel and the latch knob are oriented as shown. Attach the lower end of the Storage Latch (53) to the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8" Nut (12).

  • Page 16: The Chest Heart Rate Monitor

    THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR • D o not expose the heart rate monitor to direct sunlight for extended periods of time; do not expose The heart rate it to temperatures above 122° F (50° C) or below 14° monitor consists of F (-10°...

  • Page 17: Operation And Adjustment

    OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same circuit.
  • Page 18 CONSOLE DIAGRAM FEATURES OF THE CONSOLE You can even listen to your favorite workout music or audio books with the console’s stereo sound system The treadmill console offers an impressive array of while you exercise. features designed to make your workouts more effec- To turn on the power, see page 19.

  • Page 19: To Turn On The Power

    HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
  • Page 20 5. Follow your progress with the displays. Press the Home button to return to the default menu (see THE INFORMATION MODE on page As you walk or run on the treadmill, the display can 24 to set the default menu). If necessary, press the show the following workout information: Home button again.
  • Page 21 7. Turn on the fan if desired. When you select an onboard workout, the display will show the duration of the workout and the name The fan features several speed settings and an of the workout. In addition, a profile of the speed auto mode.
  • Page 22 Note: The calorie goal is an estimate of the HOW TO USE AN IFIT LIVE WORKOUT number of calories that you will burn during the workout. The actual number of calories that Note: To use an iFit Live workout, you must have ac- you burn will depend on your metabolic rate.
  • Page 23 7. Measure your heart rate if desired. When you select an iFit Live workout, the display will show the duration of the workout, the distance you will walk or run, and the approximate number See step 6 on page 20. of calories you will burn.
  • Page 24 THE INFORMATION MODE function. If the demo mode is turned on, the word ON will appear in the matrix. To turn on or turn off The console features an information mode that keeps the demo mode, press the Enter button. track of treadmill information and allows you to person- 3.

  • Page 25: How To Fold And Move The Treadmill

    HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to the lowest position before you fold the treadmill. left.

  • Page 26: Troubleshooting

    TROUBLESHOOTING Most treadmill problems can be solved by following c. Remove the key from the console, and then the simple steps below. Find the symptom that reinsert it. applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual. d.
  • Page 27 Locate the Reed Switch (52) and the Magnet (50) b. If the walking belt is overtightened, treadmill per- on the left side of the Pulley (49). Turn the Pulley formance may decrease and the walking belt may until the Magnet is aligned with the Reed Switch. become damaged.
  • Page 28 SYMPTOM: The walking belt is off-center or slips b. If the walking belt slips when walked on, first re- when walked on move the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws a. If the walking belt is off-center, first remove the clockwise, 1/4 of a turn.

  • Page 29: Exercise Guidelines

    EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.

  • Page 30: Part List

    PART LIST Model No. NTL12011.0 R1211B Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Screw Reed Switch Clip #8 x 3/4" Screw Reed Switch 3/8" x 2" Bolt Storage Latch 1/4" x 1/2" Screw Drive Motor 1/4" Star Washer Motor Belt 3/8"...
  • Page 31 Key No. Qty. Description Key No. Qty. Description Left Speaker Cover Pulse Bar Back Right Speaker Cover Pulse Bar Console Right Speaker Back Cover Console Frame Incline Motor Spacer Console Ground Wire Console Clamp Chest Strap #8 x 1 1/4" Screw Chest Sensor #3 Screw #10 x 1/2"...

  • Page 32: Exploded Drawing

    EXPLODED DRAWING A Model No. NTL12011.0 R1211B...
  • Page 33 EXPLODED DRAWING B Model No. NTL12011.0 R1211B...
  • Page 34 EXPLODED DRAWING C Model No. NTL12011.0 R1211B...
  • Page 35 EXPLODED DRAWING D Model No. NTL12011.0 R1211B...

  • Page 36: Ordering Replacement Parts

    ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) • the name of the product (see the front cover of this manual) • t he key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING near the end of this manual) LIMITED WARRANTY IMPORTANT: You must register this product within 30 days of the purchase date to avoid added fees for service needed under warranty.

This manual is also suitable for:

C 1500 proNtl12011.0

Table of Contents