Figure 4 Mounting Dimensions - Seagate ST500LM000 Product Manual

Figure 4 Mounting dimensions (for FIPS 140-2 models)
FIPS 140-2 Models Contain 3 Tamper Evident Stickers with the marking "Tamper Indicator - Do Not Remove".
These stickers must remain attached to provide the tamper evidence throughout the life of the drive.
N
OTE
Removing these stickers will indicate tampering and void the drive warranty. (
S L T SSHD SATA P
EAGATE APTOP HIN
M , R . D
RODUCT ANUAL EV
BREATHER HOLE,
DO NOT COVER OR SEAL
Do Not Remove *
Tamper Indicator *
TAMPER PROOF LABELS ON BOTH SIDES
DO NOT PEEL OR REMOVE.
May not represent actual labels.)
RECOMMENDED CASE TEMP
MEASUREMENT LOCATION
ON THE END OF THE DRIVE
17