Setup - GE EPM 7300 Installation Manual

Setup

The screen explains various parameters related to configuration and setup.
Configuration: Mega WATT, Leading Zero, Reset Protection, Open Delta, KYZ Output for positive WH, KYZ Output
for negative WH.
Protocol: Relay 1, Relay 2, Communications and DC Output.
Status/Value: The user can set the values in the Status and Value fields. Under Positive WATT and Negative WATT,
the status is shown as Above/Below for Limit 1 and Limit 2. The user can directly set the status to the device by clicking
on the arrow buttons on respective fields to change the value from Above to Below or from Below to Above. The user
can enter the set values by clicking on the field that contains the rectangular box that filled with White color on respective
fields by entering the desired set values. Once the user enters the set value, by clicking on the Set button of the respective
field, will set the value in to the device. Against these settings the wizard will prompt user for the conformation.
Legend: The Legend is applicable for Configuration parameters. Enabled status is displayed in red, Otherwise the status
is displayed in gray.
240 PMCS Interface Toolkit