Gen Plc; Master Tab - GE EPM 7300 Installation Manual

GEN PLC

The Generator Programmable Logic Controller (PLC) is a specially programmed PLC with specific number of I/O
modules, controlled by a Master PLC program up to maximum number of 16 Generators.
GEN PLC Tabular wizard mainly have 3 tabs as described below.

Master Tab

The Master PLC lists 16 generators displaying status for each generator separately. The status types are:
• Run/Stop
• Alarm
• Shutdown
• Runtime (in hours)
• Lead Value
If a particular generator is stopped, it is displayed in gray color; if a generator is running, in green; if there is an alarm, in
amber; and shutdown of a generator in red.
The parameters of generators are:
•
Engine Crank Time (In seconds)
•
No. of Cranks
•
Cool Down Time (In seconds)
223