Pqm (Power Quality Meter) - GE EPM 7300 Installation Manual

PQM (Power Quality Meter)

Tab
Metering
Demand
I, V Range
P Range
Analysis
I/O
110
All six function buttons under the Info box are enabled for the PQM.
The PQM Tabular Data Screen wizard has nine command buttons, described below.
Button
Clear Energy
Reset Device
Clear Max Demand Values
Clear Frequency Values
Clear Current Min/Max
Clear Voltage Min/Max
Clear Power Min/Max
Clear Max THD Values
Reset Pulse Counter
Table 19. PQM Tabular data screen commands.
See the PQM Instruction Manual (Chapter 5, Actual Values) for information on the
display of data values under different device configurations. Values not configured
for use are displayed as N/A.
Function
Clears the PQM's energy counters
Issues a RESET command to the PQM
Clears the PQM's Max Demand values from memory
Clears the PQM's Max Frequency values from memory
Clears the PQM's Current Min/Max values from memory
Clears the PQM's Voltage Min/Max values from memory
Clears the PQM's Power Min/Max values from memory
Clears the PQM's Max THD values from memory
Resets the PQM's pulse counter
PMCS Interface Toolkit