Sr469 Motor Management Relay; Metering Tab - GE EPM 7300 Installation Manual

SR469 Motor Management Relay

The Multilin SR469 Metering Values screen shows the metering values, for example, Amps A, Amps B and Amps C; and
184
All six function buttons under the Info area are enabled for the SR469.
The SR469 Tabular Data Screen wizard has nine command buttons, described below.
Tab Button
Metering Reset Device
Clear MWh and Mvarh
Clear Peak Demand
Status Motor Start/Motor Stop
Clear RTD Maximums
Trip Clear Last Trip Data
I/O Clear Analog Input
Min/Max Data
Maintenance Preset Digital Counter
Clear Trip Counters
Table 25. SR469 Tabular data screen commands.
See the SR469 Motor Management Relay manual (Chapter 5, Actual Values) for
information on the display of data values under different device configurations.
Values not configured for use are displayed as N/A.

Metering Tab

Function
Issues a RESET command to the SR469
Clears these values from the SR469's memory
Clears this data from memory
Issues Motor Start or Motor Stop commands
Resets the RTD Maximums data
Clears this data from memory
Clears this data from memory
Allows presetting of digital counters.
Clears the trip count data from memory.
PMCS Interface Toolkit