Setup Two Tab - GE EPM 7300 Installation Manual

Reset
• WATT Hour
• VAR Hour
• VA Hour
If it is kilo volt inputs, the decimal placement is 2 (as shown in the screen); if kilo amp input the decimal placement is 3
and if mega watt input, it is 1.
Note: Configured is displayed in green, Enabled in red and Reset in Amber.

Setup Two Tab

The screen explains various parameters related to Limits and Triggers:
Brief explanation of each of the columns is described below
Column
Limit 1
Trigger - Relay 1
Trigger - Relay 2
Limit 2
Trigger - Relay 1
Trigger - Relay 2
Set Above/Below Limit 1
Set Above/Below Limit 2
230
Limit 1 value for the Associated quantity (For example: Phase A Amps)
LED display in Amber color : Limit 1 of the associated value will trigger Relay 1.
LED display in Gray color:
LED display in Amber color : Limit 1 of the associated value will trigger Relay 2.
LED display in Gray color:
Limit 2 value for the Associated quantity (For example: Phase A Amps)
LED display in Amber color : Limit 2 of the associated value will trigger Relay 1.
LED display in Gray color:
LED display in Amber color : Limit 2 of the associated value will trigger Relay 2.
LED display in Gray color:
LED display in RED color : Limit 1 of the associated value is Set for Above.
LED display in Gray color:
LED display in RED color : Limit 2 of the associated value is Set for Above.
Description
Limit 1 of the associated value will not trigger Relay 1.
Limit 1 of the associated value will not trigger Relay 2.
Limit 2 of the associated value will not trigger Relay 1.
Limit 2 of the associated value will not trigger Relay 2.
Limit 1 of the associated value is Set for Below.
PMCS Interface Toolkit