Local Rtd Tab - GE EPM 7300 Installation Manual

Local RTD Tab

369 Relay - Local RTD Tab
This tab displays information about any RTD temperature probes connected directly
to the device. Information on this tab is only available if the RTD option is installed
in the relay.
Information and alarm indication for each RTD is only available when that RTD is
programmed for operation. If an RTD's Application is set to "none" then all fields for
that RTD display "N/A".
The hottest Stator RTD indicates which RTD is currently returning the highest
temperature. This condition is indicated by red text in the Temperature field.
Only one alarm condition can be displayed at a time – highest priority alarms are
displayed in the alarm indicator. For example, if a "High Alarm" was triggered and
latched and the RTD value returned to the "Alarm Active" state, the "High Alarm"
latched indicator would persist.
180 PMCS Interface Toolkit