Command List; General Command Group - GE Digital Energy 1018959 Operating Manual

2.2

COMMAND LIST

The various commands are split in different groups, depending on the involved functionality, and are
listed here in accordance with their group classification.
The command-line interface includes a command auto-completion feature. Normally, typing a
command without any parameter displays usage information on the command. A help command is
also available.
Note that all commands are case-sensitive.

2.2.1 General command group

The general command group consists of the following commands:
Command Parameters
general | network | dns |
user | service |
help
time | smtp | snmp |
trap | ups | rccmd |
events | log
list
version
logout
exit
passwd
ping [hostname] | [X.X.X.X]
nvdefault
nvsave
nvdump
nvupdate
upgrade
reboot
Modifications reserved
OPM_CNT_SNM_BAS_CRD_1GB_V012.doc
Description
Show help information
general shows all general commands
network shows all network commands
etc ...
List all available commands
Display the board FW version
User logout
NOTE: Auto-logout after 10 min inactivity
User logout
Change current user password
NOTE: Password length is limited to 8 chars.
The command line interface may accept longer passwords, although
only the first 8 characters are significant.
Ping IP address or hostname
hostname fully qualified hostname
X.X.X.X IP-address
Reset the configuration to factory default
Save changes to non-volatile memory
Dump configuration file (gedeups.cfg) to FTP area
Update the SNMP/Web configuration with the gedeups.cfg file from
the FTP area
NOTE: The adapter performs no checks on the received file. Make sure
the file format is correct - unexpected behaviour may occur.
Start the upgrade with the uploaded firmware
NOTE: FW file to be uploaded via FTP
System restart (soft-reset)
NOTE: All unsaved changes will be lost
Page 14/58
Operating Manual SNMP/Web Adapter