Smtp Command Group - GE Digital Energy 1018959 Operating Manual

2.2.7 Smtp command group

The smtp command group allows to configure the e-mail sending functionality for e-mail notification of
UPS events and alarms:
Command Parameters
showsmtp
email-alert on | off
smtp-timeout [seconds]
smtp-server [hostname]
email-authen on | off
email-account [user]
email-passwd [pwd]
smtp-sendername [sender]
addrcpt [e-mail]
delrcpt [e-mail]
sendemail [msg]
Modifications reserved
OPM_CNT_SNM_BAS_CRD_1GB_V012.doc
Description
Show detailed e-mail settings
Enable/disable email functionality
on E-mail alert enabled
off E-mail alert disabled
Set timeout for TCP communication with SMTP server
[seconds] Timeout in seconds (range 5-60 seconds)
Set SMTP server address
[hostname] hostname/IP-address of the SMTP server
NOTE: using hostnames requires DNS connection.
Enable/disable authentication for email server
on E-mail server requires authentication
off E-mail server does not require authentication
Set email server account
[user] Username for e-mail server authentication
Set email server password
[pwd] Password for e-mail server authentication
Set the 'mail from:' header
[sender] E-mail address (63 chars max)
NOTE: This may be a critical parameter, as some SMTP
servers require a valid sender address within a specified
domain. Confirm the exact requirement with your service
provider or IT function.
Add a recipient address
[e-mail] E-mail address (63 chars max)
NOTE: Maximum 8 recipients can be defined.
Delete a recipient address
[e-mail] E-mail address (63 chars max)
Send a test mail
[msg] Test message to be send
Page 20/58
Operating Manual SNMP/Web Adapter