2.2.12 Events command group
The events command group controls the alarm notification via traps and/or e-mail.
Command
Parameters
showevents
event
[row] [e-mail] [trap]
2.2.13 Log command group
The log command group allows to access the logs maintained by the SNMP/Web adapters.
Command
Parameters
syslog
upslog
logdump
clearlog
Modifications reserved
OPM_CNT_SNM_BAS_CRD_1GB_V012.doc
Description
Show the alarm notification configuration
Configure the alarm notification for a specific event
[row]
Alarm ID
[e-mail] 0 = no e-mail notification for this alarm
1 = send e-mail on alarm (de)activation
[trap]
0 = no trap sent for this alarm
1 = send trap on alarm (de)activation
Description
Dump the System log to the console
Dump the UPS log to the console
Dump the System and UPS log to the FTP area
Clear the UPS event log
Page 25/58
Operating Manual SNMP/Web Adapter