Scanning Film; Connecting The Lightlid 35 - Microtek ScanMaker i460 Supplement Manual

D. Scanning Film
To scan film, use the optional LightLid 35 IV transparency adapter. The LightLid 35 IV
is specially designed to scan 35mm slides and 35mm filmstrips. A maximum of 4
mounted slides or one strip of 5 frames can be loaded at a time.
Microtek recommends the use of this accessory to scan slides for on-screen display
purposes or where high resolution is not critical. For high-quality print reproduction,
we recommend purchasing a dedicated slide scanner or a Microtek scanner with built-
in film-scanning features.
I. Connecting the LightLid 35 IV
1. Unpack the LightLid 35 IV.
2. Remove the scanner lid.
3. Make sure that the scanner is powered off; then plug the connector of the
LightLid into the scanner's 9-pin accessory port.
ScanMaker i460 Supplement 11