Table of Contents
Advertisement
Other Functions
Release button
[SRC] [VOL]
[ ]
Clock Adjustment
1
Select the source
Press the [SRC] button.
2
Enter Function Setting mode
Press the [VOL] knob for at least 1 second.
"FUNCTION" is displayed.
3
Enter Clock adjustment mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "SETTINGS"
"CLOCK"
ADJUST".
The hour display blinks
4
Adjusting Clock
Turn the [VOL] knob to set the hours and press
it when to finish the hour adjusting.
The minute display blinks.
Turn the [VOL] knob to set the minutes and
press it when to finish the minute adjusting.
5
Exit Function Setting mode
Press the [
] button for at least 1 second.
Demonstration Mode Setting
Turning the demonstration mode ON/OFF.
1
Enter Function Setting mode
Press the [VOL] knob for at least 1 second.
"FUNCTION" is displayed.
2
Select Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "DEMO MODE".
18
|
KDC-U546BT
3
4
Initial Setting
You can select following Initial Setting items.
1
2
3
>
"CLOCK
Set the Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "ON" or "OFF".
Exit Function Setting mode
Press the [
] button for at least 1 second.
Select the Standby source
Press the [SRC] button.
Select the "STANDBY" display.
Enter Function Setting mode
Press the [VOL] knob for at least 1 second.
"FUNCTION" is displayed.
Select the function item
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "INITIAL SET"
Function item.
Function item
Selectable setting/item
"PRESET TYPE"
TYPE NORMAL:
1 station can be assigned to 1 preset button in each
of 6 bands (FM1, FM2, FM3, MW, SW1 and SW2),
i.e., a total of 36 stations (6 stations x 6 bands) can
be preset.
TYPE MIX:
A total of 6 stations can be assigned to a total of 6
preset buttons regardless of band (FM1, FM2, FM3
MW, SW1, and SW2). You can recall a preset station
without switching between bands.
"KEY BEEP"
Setting the operation check sound (beep sound)
on/off.
OFF/ON
"TDF ALARM"
Informs you by alarm sound about 30 seconds
that you forgot to detach the faceplate when ACC
is set to OFF.
OFF/ON
"BUILT-IN AUX"
When this is set to ON, AUX source can be selected.
ON1: Outputs the sound of external unit connected
to the AUX terminal when switched to AUX
source.
ON2: Activates the attenuator function when
turning on the power with AUX source
selected. Cancel the attenuator function
by turning the volume knob clockwise
when listening to the audio of the external
equipment.
OFF: Disables the selection of AUX source. Set to
OFF when not using the AUX terminal.
Hide quick links:
Advertisement
Table of Contents
