6. When you have completed the diagnostics tests, exit the diagnostics programs.
Special keystrokes
When running the diagnostics programs remotely through a terminal emulation
program, some function keys might not work. Use the following key combinations
for the function keys that do not work.
To transmit:
F1
F2
F3
F5
Enter
Page Up
Page Down
Considerations when using IBM Remote Supervisor Adapter
To connect a remote terminal, follow the instructions in the documentation that
comes with the IBM Remote Supervisor Adapter.
When using the remote terminal to Redirect Text Console mode, keyboard control
is limited to ASCII characters and arrow keys. You can simulate some special keys
by using certain key combinations. The key combinations consist of a prefix (Ctrl-]
or Ctrl-Z) followed by designated keystrokes:
To transmit:
F1-F9, F10
F11
F12
Page Up
Page Down
Alt-F1
Ctrl-Alt-Del
Note: If one prefix does not work, use the other instead.
14
Hardware Maintenance Manual: xSeries 330 Type 8675
v Serial ports
v ASM restart (under System Management)
Also, the following tests require user interaction at the server:
v Diskette
v CDROM/DVD
v CDRW
v Parallel port external loopback
v Ethernet external loopback
v Modem
To return to the service processor main menu, enter Ctrl-R + Ctrl-E + Ctrl-T.
Type:
Ctrl-A
Ctrl-O
Ctrl-L
Ctrl-D
Ctrl-N
Ctrl-Q
Ctrl-Z
Type:
Prefix followed by 1-9, 0
Prefix followed by -
Prefix followed by =
Prefix followed by Ctrl-u
Prefix followed by Ctrl-d
Prefix followed by F1
Prefix followed by Ctrl-r