IBM xSeries 330 Hardware Maintenance Manual page 73

For information about using the ASM Web interface to monitor your server, see the
IBM Remote Supervisor Adapter User's Guide for the xSeries 330, which is available in
Adobe Acrobat Portable Document Format (PDF) on the IBM Documentation CD.
To update the Remote Supervisor Adapter firmware, complete the following steps:
1. Turn on the server.
2. Insert the IBM Remote Supervisor Adapter Support CD into the CD-ROM drive
and close the CD-ROM drive before the server completes power-on self-test
(POST).
Note: If you do not insert the CD and close the CD-ROM drive before POST
completes, you must restart the server with the CD in the CD-ROM
drive.
3. The CD starts automatically and the IBM Remote Supervisor Utility window
opens.
4. Use the Up Arrow and Down Arrow keys ( and ) to select Update System
Management Firmware; then, press Enter. A warning window opens.
5. Press Enter to continue. The Firmware Update Options Menu window opens.
6. Use the arrow keys to select Normal Flash - All subsystems; then, press Enter.
69
Installing options