IBM xSeries 330 Hardware Maintenance Manual page 76

72
Hardware Maintenance Manual: xSeries 330 Type 8675
4. Use the Up Arrow and Down Arrow keys ( and ) to select Configuration
Settings; then, press Enter. The Configuration Settings window opens.
5. Use the arrow keys to select Ethernet Settings; then, press Enter.
The Ethernet Settings window opens.
Note: The values in the following window are only examples; your settings
will be different.
6. Use the arrow keys to navigate to each field. Your system administrator can
provide the information for the following fields:
Network Interface
The default value is Enabled; verify that it is still set to Enabled.
IP Address
Type the IP address of the Remote Supervisor Adapter.
Subnet Mask
Type the subnet mask used by the Remote Supervisor Adapter. The
default value is 255.255.255.0.
Gateway
Type your network gateway router.