12
BRAKE SYSTEM
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5
brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint!
Use only clean brake fluid from a sealed container.
–
Remove the rear brake linings.
–
Stand the vehicle upright.
–
Remove screw cap
–
Push the brake piston back to its basic position and ensure that brake fluid does
not flow out of the brake fluid reservoir, sucking it away if it does.
–
Install the rear brake linings.
–
Add brake fluid to level
Brake fluid DOT 4 / DOT 5.1 (
400233-10
–
Mount the screw cap with the membrane and the O-ring.
Info
Clean up overflowed or spilt brake fluid immediately with water.
x
with membrane
and the O-ring.
1
2
x
.
A
p. 119)
76