Transmission Oil Level Check - Yamaha YZ250(V) Owner's Service Manual

Yz series
Table of Contents

Advertisement

TRANSMISSION OIL LEVEL CHECK

3. Inspect:
9 Air filter element
Damage¡Replace.
4. Apply:
9 Foam-air-filter oil or equivalent oil
To the element.
NOTE:
Squeeze out the excess oil. Element should be
wet but not dripping.
5. Install:
9 Filter guide 1
NOTE:
Align the projection a on filter guide with the
hole b in air filter element.
6. Apply:
9 Lithium soap base grease
On the matching surface a on air filter ele-
ment.
7. Install:
9 Air filter element 1
9 Washer
9 Fitting bolt
NOTE:
Align the projection a on filter guide with the
hole b in air filter case.
EC35H002
TRANSMISSION OIL LEVEL CHECK
1. Start the engine, warm it up for several min-
utes and wait for five minutes.
2. Place the machine on a level place and hold
it up on upright position by placing the suit-
able stand under the engine.
3-12
INSP
ADJ
2 Nm (0.2 m•kg, 1.4 ft•lb)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yz250

Table of Contents