Cable Routing Diagram - Yamaha YZ250(V) Owner's Service Manual

EC240000

CABLE ROUTING DIAGRAM

1 "ENGINE STOP" button lead
2 Throttle cable
3 Clutch cable
4 Clamp
5 Wireharness
6 Radiator breather hose
7 Air vent hose
8 Crankcase breather hose
9 Overflow hose
CABLE ROUTING DIAGRAM
A Pass the clutch cable on the
outside of the throttle cable and
"ENGINE STOP" button lead.
B Align the throttle cable locating
tape with the cable guide.
C Pass the throttle cable, clutch
cable and "ENGINE STOP" but-
ton lead above the radiator
hose.
D Clamp the "ENGINE STOP" but-
ton lead to the frame. Tighten
the clamp so that the "ENGINE
STOP" button lead is not pulled
when the handlebar is turned to
the right and left.
E Clamp the throttle cable, clutch
cable and wireharness to the
frame.
F Clamp the throttle cable and
wireharness to the frame.
2-14
SPEC
G Pass the clutch cable in front of
the center of the cylinder head
tightening nut.
H Pass the air vent hose, overflow
hose and crankcase breather
hose between the frame and
connecting rod.
I Locate the clamp ends in the
arrowed range.
J Pass the throttle cable behind
the air vent hose.
K Pass the air vent hose, overflow
hose and crankcase breather
hose so that they do not contact
the rear shock absorber.
L Clamp the air vent hoses.