Safety Summary - Invacare SHAPE SENSOR User Manual

DO NOT use unauthorized parts, accessories, or adapters other than authorized by
I n v a c a r e .
Both gas cylinders MUST be operational and adjusted properly BEFORE using adjust-
able back. DO NOT operate the adjustable back if only one (1) of the gas cylinders
is operational or adjusted properly.
Extreme caution is advised when it is necessary to move an UNOCCUPIED shape
sensor. Invacare recommends using two (2) assistants and making thorough prepa-
rations. Make sure to use ONLY secure, nondetachable parts for hand-hold sup-
ports. DO NOT attempt to lift the Shape Sensor by the seat sensor, back sensor,
armrests, or legrests. Use the base frame for lifting purposes. Lifting by means of
the removable (detachable) parts of a Shape Sensor may result in injury to the
assistants or damage to the Shape Sensor.
Before attempting to transfer in or out of the Shape Sensor, every precaution should
be taken to reduce the gap distance. Turn both casters toward the object you are
transferring onto.
GAGE BOTH WHEEL LOCKS.
provided you have adequate mobility and upper body strength.
A NOTE TO WHEELCHAIR ASSISTANTS
When assistance to the client is required, remember to use good body mechanics.
Keep your back straight and bend your knees.
ALWAYS engage both wheel locks while changing the orientation of the Shape
Sensor modules.
When adjusting the seat depth, make sure the adjustment knobs are securely locked
in place.
To maintain stability and safety, make sure the client is properly positioned in the
Shape Sensor before reclining or inclining (reverse recline).
When adjusting the back angle, DO NOT remove the back angle adjustment knobs,
as they help secure the back sensor to the frame.
When returning the client in the Shape Sensor to the full upright position, more body
strength will be required for approximately the last twenty (20) degrees of incline
(reverse recline). Make sure to use proper body mechanics (use your legs) or seek
assistance to avoid injury.
The Shape Sensor has a weight limit of 300 lbs.

SAFETY SUMMARY

WARNINGS
When transferring to and from the Shape Sensor, ALWAYS EN-
NOTE: This activity may be performed independently
3
SAFETY SUMMARY
98-110
S
A
F
E
T
Y
S
U
M
M
A
R
Y