Invacare SHAPE SENSOR User Manual page 23

Separate the Topshape section from the Bottomshape
section by tearing along the two perforations.
Fill in the requested information including; Dealer name,
dealer number, dealer phone number, contact person,
date, client name and any remarks.
Make sure the data form's serial number is recorded
on the order form.
Fax the data forms along with the order form to Invacare
at 1-800-870-4928. This fax line can accommodate
the longer forms.
Order Form
Information regarding the order form and available op-
tions is presented in the section titled "Creating a Sil-
®
houette System". It is important that all parts of the
order form be filled out. Within the order form, the type
of simulator back is requested. If the model being used
is complete with a Sensor panel then mark Sensor.
Earlier models of the Shape Sensor were made for
producing seats only. These models used a strap style
back.
Guarantee
Invacare unconditionally guarantees Silhouette
cushions for 60 days from the date of shipment. The
cushions are also covered for a full two years for de-
fects in materials or workmanship.
Serial Numbers
Each Shape Sensor has a separate serial number for
the back and seat sensor. These numbers must be
recorded on the order form as they give Invacare im-
portant information regarding the "personality" of the
machine. The serial numbers are located on the back
of the Shape Sensor.
SeatMaker
SeatMaker is a computer program created by Invacare
to input and manipulate the data produced on the
Shape Sensor. This software can be used by the cli-
nician to further refine the cushions and as a method
to review the data before sending it off for production.
The inputting of data into the computer is accomplished
by touching each of the imprinted data points using a
stylus and digitizing tablet. The cushions shape can
be modified and fine tuned to exactly meet the clients
needs. Once the changes are made, then the data
can be sent by modem to the factory.
General Shape Sensor specifications
Measuring grid:
10 x 10 data grid spaced 1.75" apart
Maximum depth of contour measuring capacity:
4.5" (seat and back)
Cushion construction:
HR 32 polyurethane foam with segmented top
section
Seat sensor depth:
17.5" front to back, adjustable to 11"
Seat sensor width:
20" (17.5" measuring area)
Back sensor height:
19.5" from top of seat (17.5" measuring area)
Back sensor width:
20" total (17.5" measuring area)
Seat-to-back angle adjustment:
80-110 degrees
Tilt-in-space angle adjustment:
0-20 degrees
Wheelchair transfer height:
23.5" from floor
Weight Limitation:
® 300 lbs.
Shape Sensor dimensions
Fully assembled:
With back sensor folded flat:
Base frame:
(folded flat for transport)
Seat sensor module:
Back sensor module:
Shape Sensor weight:
Frame
Back sensor module
Seat sensor module
Features
Direct measurement and recording of total posture
Tilt-in-space adjustment for more accurate simulation
Seat depth adjustable.
Sturdy 8" wheels and 5" casters with brakes and rota-
tional lock.
Removable arm rests and foot rests
23
TECHNICAL NOTES
30.5"W x 43"L x 57"H
30.5"W x 48"L x 35"H
30.5"W x 37"L x 11"H
25"W x 32"L x 9"H
26"W x 32"L x 12"H
50 lb.
68 lb.
46 lb.
98-110
T
E
C
H
N
I
C
A
L
N
O
T
E
S